Fencequip

FENCEQUIP Post Drivers. High Performance - High Quality. Made in New Zealand. Contact us today for more information and a quote. Home of FENCEQUIP HARDOX Augers
AA +
×
  • Hydraulic Hinge
      +
    Hydraulic Hinge
    Available for 4.65m or 4.95m MastsWe have designed the to have a smooth operation from parked to straight, making it very user friendly and safe.Benefits Include: - Allows you to have a taller mast and still be able to drive your tractor down the road and be under road legal height​- Great for...
    Visit Store ⊕ More like this 0 0
  • Mast Shift
      +
    Mast Shift
    MD - 300mm of travelHD - 410mm of travel (with or without Hydraulic Feet) allows you to move the Post Driver forward and backwards when Side Mounted and left to right when Rear Mounted. This means if you do not park the tractor in the right place you can move the Post Driver to the mark without havi...
    Visit Store ⊕ More like this 0 0
  • High Country Twin Guides
      +
    High Country Twin Guides
    We were approached by a number of Fencing Contractors in the lower South Island to design and build an upgrade for securing Rock Spikes, Auger Motors and Posts, when trying to navigate through hard/rocky ground.Features Include: - 4 Post Locating Pins- 5 Chain Hook Heights- Twin Guide System to Hold...
    Visit Store ⊕ More like this 0 0
  • Pin & Chain Hooks
      +
    Pin & Chain Hooks
    Pin & Chain Hook Brackets are the mini version of our High Country Twin Guides and gives you the ability to use Pins, Chains and your Post Cap to control Posts.This system takes a lot of strain off your Post Cap for longer wearing.This system can be bolted to any Post Driver with an I-Beam Mast.
    Visit Store ⊕ More like this 0 0
  • Rock Spike Unit
      +
    Rock Spike Unit
    - Allows you to rotate the Rock Spike with a pull of a lever- MD, HD & SHD models available- 90mm & 120mm Rock Spikes available in either solid or hollow with a hardened tip - MD/HD 1600mm Long - SHD 1750mm Long- 8 Tonne of Lift- MD/HD 1400mm of travel depth- SHD 1550mm of travel depth- Available i...
    Visit Store ⊕ More like this 0 0
  • Auger Head
      +
    Auger Head
    This option is great for people that need to Rock Spike as well as Drill. - The Auger head is easily mounted with 3 bolts- 2500Nm of torque at 2500psi- Auger Motor protected by a large steel hood- Telescopic extension available- Auger Motor can be mounted on a Excavator- Compatible with High Country Twin Guides​
    Visit Store ⊕ More like this 0 0
  • Auger Unit
      +
    Auger Unit
    - Auger Extractor has 8 Tonne of lift and includes a Post Lifting chain hook- Hydraulic Turning available in both Near Side (operators) and Far Side- MD/HD 1400mm of travel depth- SHD 1550mm of travel depth- High Torque Planetry Drive Motor - 2500Nm of Torque at 2500 PSI- Compact design- Compatible with High Country Twin Guides
    Visit Store ⊕ More like this 0 0
  • Hydraulic Feet
      +
    Hydraulic Feet
    Our are made out of 8mm High Tensile Hardox Wear Plate and include Ultra High Tensile 3.2mm Hardox Guards to protect rams, hoses and fittings. - 175mm Lift- 4 Tonne of power per foot
    Visit Store ⊕ More like this 0 0
  • Post Lifter
      +
    Post Lifter
    The a must when contracting. It has the ability to lift anything you can fit a chain around and has 6 Tonne of lifting power.It allows you to pull out old broken strainers and replace them with new ones without re-positioning the tractor. This makes it extremely good for repair work.Even when using ...
    Visit Store ⊕ More like this 0 0
  • Leg Roller
      +
    Leg Roller
    s work well working in areas where you do not want to damage/tear up the ground e.g. working in vineyards or orchards where you do not want to damage the tree's roots. They also work well on hill country rolling over the ground rather than pushing the tractor around. ​​
    Visit Store ⊕ More like this 0 0
×

Similar Stores   shoppers also browsed these stores