Fencequip ♡
×-
Our Pile Drivers are controlled from the Excavator Cab, allowing you to drive a Pile as far as the Digger can reach.Visit Store ⊕ More like this 0 0
150 UC37 Mast
Block weights available - 250kg, 300kg, 350kg & 400kg
Grapple and Side Tilt available
Call us to discuss your Pile Driving needs and what we can build for you
-
Our Pile Drivers are controlled from the Excavator Cab, allowing you to drive a Pile as far as the Digger can reach.Visit Store ⊕ More like this 0 0
200 UC60 Mast
Block weights available - 500kg, 750kg, 1000kg & 1200kg
Grapple and Side Tilt available
Call us to discuss your Pile Driving needs and what we can build for you
-
The Flights are built using 6mm Swedish HARDOX 450 Steel.Visit Store ⊕ More like this 0 0
The Shafts are made from High Tensile Steel Tube
Permanent Head with Interchangeable Teeth
Sizes Available:
100mm, 125mm, 150mm, 175mm, 200mm, & 125/175mm
Double Sided
Augers can be built to suit your Auger Drive Motor - hex, square or round -
The FENCEQUIP Rock Monster Auger flights are built using 8mm Swedish HARDOX 500 Steel. (They will last 130% longer than the 6mm 450 used in the FENCEQUIP HARDOX Augers)The Shafts are made from Solid HARDOX 400Interchangeable Head with interchangeable TeethDouble first flight also helps to reduce wea...Visit Store ⊕ More like this 0 0
-
We designed and built the double sided Auger for people who only want to carry one Auger and still be able to drill two sizes.Visit Store ⊕ More like this 0 0
These Augers are 125mm at the small end and 175mm at the bigger end. There is approximately 700mm of 125mm flighting, allowing you to drill deep enough for posts and you can go deep as you like with the 175mm end for strainers
-
Visit Store ⊕ More like this 0 0
- for hard and compacted soil
The Raptor Auger flights are built using 8mm Swedish HARDOX 500 Steel
The Shafts are made from Solid HARDOX 400
Sizes Available: 100mm & 150mm - other sizes available on request
Augers can be built to suit your Auger Drive Motor - hex, square or round
-
Available for 4.65m or 4.95m MastsWe have designed the to have a smooth operation from parked to straight, making it very user friendly and safe.Benefits Include:- Allows you to have a taller mast and still be able to drive your tractor down the road and be under road legal heightâ- Great for m...Visit Store ⊕ More like this 0 0
-
MD - 300mm of travelHD - 410mm of travel (with or without Hydraulic Feet)allows you to move the Post Driver forward and backwards when Side Mounted and left to right when Rear Mounted. This means if you do not park the tractor in the right place you can move the Post Driver to the mark without havin...Visit Store ⊕ More like this 0 0
-
We were approached by a number of Fencing Contractors in the lower South Island to design and build an upgrade for securing Rock Spikes, Auger Motors and Posts, when trying to navigate through hard/rocky ground.Features Include:- 4 Post Locating Pins- 5 Chain Hook Heights- Twin Guide System to Hold ...Visit Store ⊕ More like this 0 0
-
Pin & Chain Hook Brackets are the mini version of our High Country Twin Guides and gives you the ability to use Pins, Chains and your Post Cap to control Posts.Visit Store ⊕ More like this 0 0
This system takes a lot of strain off your Post Cap for longer wearing.
This system can be bolted to any Post Driver with an I-Beam Mast.
-
- Allows you to rotate the Rock Spike with a pull of a lever- MD, HD & SHD models available- 90mm & 120mm Rock Spikes available in either solid or hollow with a hardened tip - MD/HD 1600mm Long - SHD 1750mm Long- 8 Tonne of Lift- MD/HD 1400mm of travel depth- SHD 1550mm of travel depth- Available in...Visit Store ⊕ More like this 0 0
-
This option is great for people that need to Rock Spike as well as Drill.Visit Store ⊕ More like this 0 0
- The Auger head is easily mounted with 3 bolts
- 2500Nm of torque at 2500psi
- Auger Motor protected by a large steel hood
- Telescopic extension available
- Auger Motor can be mounted on a Excavator
- Compatible with High Country Twin Guidesâ -
Visit Store ⊕ More like this 0 0
- Auger Extractor has 8 Tonne of lift and includes a Post Lifting chain hook
- Hydraulic Turning available in both Near Side (operators) and Far Side
- MD/HD 1400mm of travel depth
- SHD 1550mm of travel depth
- High Torque Planetry Drive Motor - 2500Nm of Torque at 2500 PSI
- Compact design
- Compatible with High Country Twin Guides -
Visit Store ⊕ More like this 0 0
Our are made out of 8mm High Tensile Hardox Wear Plate and include Ultra High Tensile 3.2mm Hardox Guards to protect rams, hoses and fittings.
- 175mm Lift
- 4 Tonne of power per foot -
The a must when contracting. It has the ability to lift anything you can fit a chain around and has 6 Tonne of lifting power.It allows you to pull out old broken strainers and replace them with new ones without re-positioning the tractor. This makes it extremely good for repair work.Even when using ...Visit Store ⊕ More like this 0 0
-
s work well working in areas where you do not want to damage/tear up the ground e.g. working in vineyards or orchards where you do not want to damage the tree's roots.Visit Store ⊕ More like this 0 0
They also work well on hill country rolling over the ground rather than pushing the tractor around. ââ -
What makes this Side Mount different?The Post Driver/Side Mount unit is attached with a set of forks on the tractor that enables the user to pick up the Post Driver/Side Mount from either side or the rear of the machine. When in any of these three positions the Side Mount still has the ability to hy...Visit Store ⊕ More like this 0 0
-
The a proven system for fencing in a range of conditionsKey Features:- The allows you to drive down a fenceline and extend out to each post - while allowing you to take all your gear with you in the large tool box and multiple tool carriers ie spade, hand rammer and reeling/wire jennies.- This mach...Visit Store ⊕ More like this 0 0
-
The Post Driver/Side Mount is attached with a set of quick hitch Skid Steer forks that enables the user to pick up the Post Driver/Side Mount from either side or the rear of the machine.Visit Store ⊕ More like this 0 0
- 700mm travel in all three positions
- Fast and easy to repositionCheck here for more information.
-
The has been designed with feedback from top experienced fencers that use Bull Dozers in steep hill country.With 1m of Mast Shift and a large amount of Top Link angle this allows the users to thump a Post anywhere inside the track frame as well as letting you get plumb on extremely steep decents.Whe...Visit Store ⊕ More like this 0 0
-
Visit Store ⊕ More like this 0 0
Available in 350mm, 450mm & 610mm of
Rear shifts are great for razorback ridge lines and working over the wire in rear mount position
-
Visit Store ⊕ More like this 0 0
Standard and Multi-Option (forks) options available
700mm of Travel
-
Telescopic 595 - for 75hp Skid SteersThe Telescopic 595 is the lighter version of the HD Telescopic 770 and is designed for small Skid Steers.Perfect for working under power lines and trees.It has an independent Rock Spike / Drill Ram allowing you to Rock Spike or Drill without lifting the Mast up.F...Visit Store ⊕ More like this 0 0
-
HD for Heavy Duty. The HD Post Driver is 100% designed and built to withstand everyday fencing in tough conditions.The HD is built with the highest quality of parts. No expense has been spared in the manufacturing of this machine. Built tough for contractors and fencing professionals.The HD's high t...Visit Store ⊕ More like this 0 0