Similar to Fish Pro / GTX Upgraded fish finder mount RH & LH

All prices shown in dollars Add a fish finder or sounder to the RH or LH side of your GTI, GTR or Fish Pro Scout from 2021 onwards. Our heavy duty mount will happily accept screens up to 9" in size onto the RH side or LH side of your ski. The mount is made from solid aluminium and bolts up to the st...

All prices are shown in Dollars For use with Sea-doo Spark with or without boarding step, but must have boarding step provision if no boarding step is installed. Stainless steel bracket to provide an option for you to mount your transducer onto a Sea-Doo Spark transom. Slotted holes for height adjus...

All prices shown in Dollars Fish Pro Sport and Trophy, also fit GTX and RXT from 2018 onwards, hull platforms with the same rear deck engine cover as the Fish Pro Ideal for trolling, deep drops or any kind of fishing, these are built tough for the serious fisherman, and are a great position for trav...

All prices shown in dollars The angled rod holders on a Fish Pro cooler are attached via plastic clips and it is not recommended to use these rod holders for fishing or trolling lures, the GC Jetski Fishing Trolling Rod Holders are a solid aluminium construction, tig welded for strength and will not...

Use this bracket to externally mount your transducer to the transom of you Seadoo to utilize all the features that an in-hull transducer misses out on like Downscan, Sidescan and other features. Fish Pro trophy version allows clearance for Livewell inlet on transom. Fish Pro version designed for Fis...

All prices shown in dollars A stainless steel drink bottle holder to hold your drink bottle upright and out of the ice/fish slurry. This way you can keep your drink cold by keeping it in the chilli bin but your drink bottle will not be rolling around in the bottom with the fish and ice. Made from 31...

All prices shown in Dollars The Fish Pro front accessory mount is the perfect solution to mount just about anything up on the front of your Fish Pro, GTX, RXT or other models with the same front end, Gopro cameras and Nav lights are the two most common options It is 3d printed from extremely strong ...

All prices shown in dollars -Installation video below- Full kit with battery is only available in New Zealand, not for worldwide shipping The most simple, reliable and cost effective way to upgrade your jetski's battery capacity is a large single battery. Only 1 battery needed, no extra wiring is ne...

All prices shown in Dollars The Fish Pro LinQ Cooler locks on to the rear deck with an extremely smart and elaborate locking system, unfortunately sometimes a bumpy road on the way to the ramp or choppy ocean conditions can be enough to dislodge the latch and let your cooler along with all your fish...

All prices shown in dollars The perfect solution for keeping your tackle, lunch, bait or anything else inside the cooler bin but suspended up at the top away from the ice and fish or prevent juices from bait dripping down into your catch. This tray is made 100% from 316 marine grade stainless steel....

The ride plate transducer mount will easily enable you to mount your transducer underneath the hull on the ride plate area. This location is well known now to be one of, if not the most effective mounting location for transducer performance. This mounting location has many pro's such as - centrally ...

All prices shown in dollars Need somewhere safe to store your knife and pliers want a cup holder for that cold beer The Fish Pro storage kit simply bolts onto the side of the LinQ fishing cooler setup giving you 2x vertical rod holders so you can utilize your plastic rod holders elsewhere, a knife h...

All prices shown in Dollars Front mounted foot-well rod holders are the ultimate position for trolling, and even have a handy place to store a drink bottle Trolling with these rod holders means your rods are in front of your line of sight, meaning you don't have to keep turning around to check on yo...

Inspired by our FX dash mount system we have created one for the 2021 onwards VX lineup. Will not fit the GP series due to slightly different plastic fairings on dash area. Install the base mount onto the dash board area to give you a strong foundation to attach a fish finder mounting plate or rod h...

All prices shown in dollars The foundation for all the GC Jetski Fishing dash mounted products. Sleek styling combined with strength to support nearly anything including mounting of sounders up to 12" in screen size. With this base you also need to add the fish finder mount plate, or dash mount rod ...

All prices shown in Dollars Up until now there has never been a solid solution to mount a fish finder onto the dash board of a 2012 to 2018 FX Waverunner. No matter how you mount the fish finder onto the dash board, even if you use backing plates underneath the plastic, it just simply isn't strong e...

A solution for mounting any brand of fish finder onto the Yamaha VX Waverunner 2010 - 2014 models (with the same dash board arrangement seen in photos. The bridge style mount allows for a sturdy mounting bracket for fish finders, also with an option to have dash board mounted rod holders on the oppo...

If you have ever removed the top deck on any of the newer Seadoo models like the Fish Pro and GTX you may have run into issues with reinstalling the bolts that hold the top deck on. This Top Deck fastener upgrade kit fixes a few problems - The first being the separate nut washer on the underside of ...

All prices shown in Dollars TheHandlebar bagis especially designed to suit a large range of jet skis, and would suit other vehicles that have handlebars. The adjustable straps allow for the bag to be fitted snuggly around the handlebars and securely fastened via 2 top corner straps and 1 bottom stra...

All prices shown in Dollars Have you ever needed a surface for chopping bait so that you don't have to cut into the lid of your expensive chilli-bin / cooler Icey-Tek 70L - This chopping board / filleting board simply attaches to the top of an Icey-Tek 70L split lid bin. It is held in place by 2x bu...

The Podium PerformanceRacing Gear Shifter mount adds to the realism of the GTX or GTP racing chassis. This additionallows for the mounting of most gear shifters on the market. The sturdy construction of this will allow for many hours of use without issues. This standincludes: - Solid box section powder coated matte black steel - Right handed mounting

The Podium PerformanceRacing Gear Shifter mount adds to the realism of the GTX or GTP racing chassis. This additionallows for the mounting of most gear shifters on the market. The sturdy construction of this will allow for many hours of use without issues. This standincludes: - Solid box section powder coated matte black steel - Left handed mounting

The Podium PerformanceRacing Integrated Monitor Stand adds to the realism of the GTX or GTP racing chassis. This addition can hold a screen between 24"and 40" in size to increase the field of view or just give you something extra. This standincludes: - Secure mounting brackets to the chassis - Heigh...