Similar to 45 Deg Silicone Elbow Hose

Our premium quality gloss black silicone hose has excellent ply adhesion from the inner core to the outer layers. It has constant temperature resistance from -50 to 200C and pressure rated to 220 PSI. Leg sizes are approximate and may vary. Colour: Gloss Black Available Sizing: - 2" / 51mm (Approx 7...

Zoo Performance push-lock fittings (or barb fittings) are to be used with compatible soft rubber hose. which is easy to install using either heat or lubricant. The fitting will simply lock into place and the hose compresses over the fitting. As the pressure increases the more effective the seal beco...

034Motorsport is proud to offer a complete Silicone Intercooler Hose Set for the B5 Audi S4 and C5 Audi A6/Allroad 2.7T This hose set is designed to replace the failure-prone factory rubber hoses with boost-friendly automotive silicone ones. Features durable, high quality silicone hoses which were m...

034Motorsport is now offering a full silicone intercooler hose set for the B7 Audi A4 2.0T FSI Stock rubber hoses will deteriorate with age, causing leaks that can lead to a loss of boost pressure, and increasing wear on your turbo. 034Motorsport silicone hoses are far more durable, and will not cra...

Zoo Performance push-lock fittings (or barb fittings) are to be used with compatible soft rubber hose. which is easy to install using either heat or lubricant. The fitting will simply lock into place and the hose compresses over the fitting. As the pressure increases the more effective the seal beco...

Our 200 Series (PTFE) stainless steel fittings are great for applications such as running turbo feed lines, brake, clutch, power steering, hydraulic systems, nitrous or any petrol or alcohol based fuels. These fittings incorporate swivel heads for easy angle adjustment. Compatible with our 200 Series PTFE nylon and stainless steel hose.

ZOO PERFORMANCE PUSH LOCK HOSE 400 SERIES This hose is constructed with Chlorinated Polyethylene (CPE). It can be used in fuel systems, including methanol, oil coolants and also as air hose. (Not recommended for power steering applications.) Operating Pressure: 250PSI Operating Temperature: -40 to 100 AVAILABLE IN SIZES AN6, AN8, AN10, AN12

Zoo Performance push-lock fittings (or barb fittings) are to be used with compatible soft rubber hose. which is easy to install using either heat or lubricant. The fitting will simply lock into place and the hose compresses over the fitting. As the pressure increases the more effective the seal beco...

034Motorsport is proud to offer our Silicone Intercooler Inlet (Michelin Man) Hose for the AAN UrS4 and UrS6 This hose is designed to replace the failure-prone factory rubber hose with a boost-friendly automotive silicone one. This durable, high quality silicone hose was modeled directly off of the ...

Fully reinforced silicone 1.8T lower block breather hose to replace the crumbling factory plastic and rubber lower breather hoses. This hose fits longitudinal engine configurations listed below. Replaces the following factory lower breather hoses on the AWM and AMB 1.8T found in the B5/B6 Audi A4 (t...

Fully reinforced silicone 1.8T lower block breather hose to replace the crumbling factory plastic and rubber lower breather hoses. This hose fits numerous transverse engine configurations listed below. Replaces the following factory lower breather hoses on the AWW/AWP/AWV 1.8T found in the Mk4 Volks...

Fully reinforced silicone 1.8T PCV Check Valve T-Hose to replace the crumbling factory rubber hose. This hose fits longitudinal and transverse 1.8T engines that have a rubber T-hose for the PCV check valve. Replaces OEM part number 06A 103 247.06A103247Available in black only. Includes new hose clamps