Similar to Norski White Epoxy Filler

OurNatural TintableEpoxy Filler is the only tintable filler on the New Zealand market. So not only is this the hardest filler knowntoman, it can be tinted with our tints/pigments. You can even mix and match tints to achieve your desired colour. Available in a range of sizes to suit your requirements...

Norski 4to1 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin will stick to anything and offer a holding power that will impress anyone. Mixed at a 4:1 ratio ( by volume, not weight)with...

. Our Epoxy Repair Kit contains 312mls of our famous Four to One epoxy resin and a couple of sample sized bags of Filler Powder and also Glue Powder'. The concept of adding Filler Powder or Glue Powder to epoxy resin is that you can adjust the viscosity of the resin and make a glue or filler of your...

Filler Powder (Q-Cells) are white microscopic glass spheres that can be added to our world famous 421 Epoxy Resin. Once the resin has cured with the filler powder embedded in it, upon being sanded, the microscopic spheres explode. Therefore, you can produce your own filler with it's own consistency....

Our Epoxy Thinners is better named Epoxy Clean Up Solution', so we added to the name of the product. Used when you spill a bit of epoxy resin based glue, filler or in fact any epoxy based product somewhere you don't want to keep it. Developed over the years, this product is a blend of solvents which...

Similar to the Filler Powder, our Glue Powder can be added to our 4 to 1 Epoxy Resin to create a super sticky glue. This can be very handy when trying to glue something upside down or where you dont want the glue to move whilst curing. Typically used in a mixing ratio of 1-1.5 parts of Aerosil to 1 part of resin to download the SDS for this product

Our 5 Minute Epoxy product sets crystal clear and bonds virtually any substance to either itself or dis-similar material in under 5 minutes, Timber, steel, ceramics, most plastics, are no problem Epoxy technology is the best type of technology for glues and fillers as it's load-bearing strength is e...

These pumps are awesome for pumping the correct volumes of our 4:1 Epoxy Resin. One pump from the large pump equals 4 x the volume of one pump of the small pump. Please note: 4:1 is not weighed for its measure - it's 4:1 by volume (ie: you actually need to measure it) to download the user instructions.

Epoxy Carborundum is an epoxy based filler with the inclusion of carborundum chips, which means this product, when mixed correctly with it's supplied hardener is resistant to continual sliding or bashing movements against itself. We designed this product for application on the keel of dinghys that a...

Our a two-part penetrating solution which is your go to for rotten or degraded timber. This product is full of solvent which allows the 1:1 mixed solution to soak into timber of any sort and create an epoxy hard coating that will arrest mould, rot and fungus. This is available in a range of sizes st...

This is ourEpoxy Mortar product which is typically used as a concrete glue. As with all of our epoxy products it offers enormous strength and it's best holding power is achieved with attaching ceramic products to ceramic productshowever this product is extremely versatile and as with most of our pro...

his is ourEpoxy Mortar product which is typically used as a concrete glue. As with all of our epoxy products it offers enormous strength and its best holding power is achieved by attaching ceramic products to ceramic productshowever this product is extremely versatile and as with most of our product...

This kit has an extremely tough hardener for the resin and the contents are designed to offer a repair to knots in floors or tables where extra hard wearing is required. This kit contains:- 312mls of Knot Fill Resin, Brush, Sandpaper, Mixing Sticks and Instructions. You cant pour this resin thicker ...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 300 gram per square meter of matting. 300 GSM (Grams per square meter) is our most flexible matting and is widely stocked by our distributors as it will bend around curves and corners the easiest. This mat has a...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 450 gram per square meter of matting. 450 GSM (Grams per square meter) isstill relatively flexible matting and is widely stocked by our distributors as it will bend around curves and corners but not to the same ...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 600 gram per square meter of matting. 600 GSM (Grams per square meter) isnot flexible matting and is widely stocked by our distributors. as It doesn't bend around curves and cornersvery well at all but offers ex...

Our 200 GSM Glass Cloth is supplied in 1 Square Meter packs and for those larger jobs, we have 2 square meter packs available. We will even sell you a larger length off our 1 meter wide roll if you want. Designed for use with our 421 Epoxy Resin, this product becomes invisible in the resin when cure...

A kit that contains all you need for carrying out repairs to your surfboard. Our Surfboard Resin is a clear coat for use with surfboards that have a PU (polyurethane) foam blank.These boards are typically denoted by a wooden stringer running through the board from tip to tail. Epoxy boards dont have...

1" Version: - 25mm ID of filler neck - 38mm OD of filler neck base (weld portion) 1.5" Version: - 36mm ID of filler neck - 49mm OD of filler neck base (weld portion) - 32mm height with cap threaded on - O-ring seal inside cap - Machined from 6061 Billet aluminum Perfect for a water tank, washer bott...

Easy application. Designed for medium-sized installations. Injector nozzle fits drilled holes, and mixes the two-part epoxy with no mess - An epoxy injector and mixer all-in-one. - Automatically mixes and dispenses an even flow of adhesive to the required hardener to resin ratio (2:1). - Easy to use...

"It was always you Helen" Demonic Pinfestation made the absolute best Helen from Candyman pin It is so detailed, from her burnt head to the little candies and bloody writing. Absolute perfection. Horror Enamel Pin- 2.5 Soft Enamel w/Epoxy and printing. Black Nickel Plated, pearlized enamel. Double R...

"I've never heard so many disgusting stories in all my life." Night of the Demons is a near perfect film to me so of course I had to nab these beautiful Judy pins from Demonic Pinfestation. 2 Soft Enamel w/Epoxy and 2 color printing Black Nickel Plating, Double Rubber Clutch, Back Stamp, pink glitte...