Similar to Norski Surfboard Resin

A kit that contains all you need for carrying out repairs to your surfboard. Our Surfboard Resin is a clear coat for use with surfboards that have a PU (polyurethane) foam blank.These boards are typically denoted by a wooden stringer running through the board from tip to tail. Epoxy boards dont have...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 300 gram per square meter of matting. 300 GSM (Grams per square meter) is our most flexible matting and is widely stocked by our distributors as it will bend around curves and corners the easiest. This mat has a...

Norski 4to1 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin will stick to anything and offer a holding power that will impress anyone. Mixed at a 4:1 ratio ( by volume, not weight)with...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 450 gram per square meter of matting. 450 GSM (Grams per square meter) isstill relatively flexible matting and is widely stocked by our distributors as it will bend around curves and corners but not to the same ...

Kleer Kast is our clear resin product typically for use with a mould and is normally used for smaller work. This polyester product is amazingly clear in it's natural state and capable of accepting our pigments, dyes and mica powders. As with all polyesters, when cured, this resin will shrink fractio...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 600 gram per square meter of matting. 600 GSM (Grams per square meter) isnot flexible matting and is widely stocked by our distributors. as It doesn't bend around curves and cornersvery well at all but offers ex...

Our Resin Art Kit is a great way to make a start on your Resin Art project. 'Resin Art is the concept of colouring resin and moving it (normally with a hair dryer) on a surface to create unique patterns. You can apply resin on glass, wood, picture canvass's, pretty much any substrate. Why not have a...

This is the larger of our two Polyester Fibreglass Repair Kits and contains:- 500ml Polyester Resin, Chopped Strand Matt, Brush (for resin application), 2 x Mixing Sticks, Cleaning Fluid and Instructions. Everything you need to carry out a slightly larger polyester fibreglass repair. The extra ingre...

Polyester Gelcoat is used against your mould for the perfect finish that you require for your article. Applied at 0.5mm you should achieve a coating of around a 1.5sqm per kilo. Mixed at a 2% ratios with the supplied catalyst your work time will be 15-25 minutes, so you need to have your mould all s...

Filler Powder (Q-Cells) are white microscopic glass spheres that can be added to our world famous 421 Epoxy Resin. Once the resin has cured with the filler powder embedded in it, upon being sanded, the microscopic spheres explode. Therefore, you can produce your own filler with it's own consistency....

. Our Epoxy Repair Kit contains 312mls of our famous Four to One epoxy resin and a couple of sample sized bags of Filler Powder and also Glue Powder'. The concept of adding Filler Powder or Glue Powder to epoxy resin is that you can adjust the viscosity of the resin and make a glue or filler of your...

This kit has an extremely tough hardener for the resin and the contents are designed to offer a repair to knots in floors or tables where extra hard wearing is required. This kit contains:- 312mls of Knot Fill Resin, Brush, Sandpaper, Mixing Sticks and Instructions. You cant pour this resin thicker ...

Similar to the Filler Powder, our Glue Powder can be added to our 4 to 1 Epoxy Resin to create a super sticky glue. This can be very handy when trying to glue something upside down or where you dont want the glue to move whilst curing. Typically used in a mixing ratio of 1-1.5 parts of Aerosil to 1 part of resin to download the SDS for this product

The ingredients of this kit are as follows:- 250ml Polyester Resin, Chopped Strand Matt (140mm x 1M), Brush, Mixing Sticks, Sandpaper and Instructions. Everything that you need to carry out a small polyester fibreglass repair. If you require more matting have a look at our larger kit or you can buy the ingredients all separately. The Instructions for use are included on the back of the box.

Mica Powder offers a metallic appearance to the resin when added, 20 grams is enough to colour between 1 and 3 Litres of resin depending on the depth of colour result you are after. Awesome colour results can be achieved combining Mica Powder with dyes. The productimagesshown are for illustration purposes only and may not be an exact representation of the product.

These are super handy for measuring and keeping your hands free of resin. Resin is super sticky and quite hard to remove, so we suggest the use of disposable gloves. The other mixing equipment supplied in the kitare all things that you will use no matter what sort of resin job you are about to tackl...