Similar to Norski PVA Release Agent

Mould release wax is the answer for getting your products out of the mould, this is what the professionals use. Based on the same principle as waxing your vehicle, however, this product is applied with a clean cloth then wiped off with another clean cloth. This process needs to be repeated up to 5 t...

These pumps are awesome for pumping the correct volumes of our 4:1 Epoxy Resin. One pump from the large pump equals 4 x the volume of one pump of the small pump. Please note: 4:1 is not weighed for its measure - it's 4:1 by volume (ie: you actually need to measure it) to download the user instructions.

Diluted with distilled water, PVA size is a contemporary size for fabric support. PVA seals the fabric but does not re-absorb atmospheric moisture, preventing the size layer from swelling and shrinking. It has a neutral pH and does not yellow, plus it retains its flexibility, does not emit harmful v...

These are super handy for measuring and keeping your hands free of resin. Resin is super sticky and quite hard to remove, so we suggest the use of disposable gloves. The other mixing equipment supplied in the kitare all things that you will use no matter what sort of resin job you are about to tackl...

Norski 4to1 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin will stick to anything and offer a holding power that will impress anyone. Mixed at a 4:1 ratio ( by volume, not weight)with...

Swimming Towel Welcome to the. No longer will you have to continually try to fit your towel, and your clothes into your bag while you're swimming. No longer will you have to hang your chlorine riddled towel out to dry (or no more discovering said towel 3 weeks later clumped in the corner). With our ...

OurNatural TintableEpoxy Filler is the only tintable filler on the New Zealand market. So not only is this the hardest filler knowntoman, it can be tinted with our tints/pigments. You can even mix and match tints to achieve your desired colour. Available in a range of sizes to suit your requirements...

Polyester Gelcoat is used against your mould for the perfect finish that you require for your article. Applied at 0.5mm you should achieve a coating of around a 1.5sqm per kilo. Mixed at a 2% ratios with the supplied catalyst your work time will be 15-25 minutes, so you need to have your mould all s...

Mica Powder offers a metallic appearance to the resin when added, 20 grams is enough to colour between 1 and 3 Litres of resin depending on the depth of colour result you are after. Awesome colour results can be achieved combining Mica Powder with dyes. The productimagesshown are for illustration purposes only and may not be an exact representation of the product.

Gorilla Aliphatic PVA is a woodworking adhesive formulated for general use with a fast-setting speed, ready to use, non-staining, suitable for most interior work, rapid hold once the joint is made. Features and Benefits: - Strongly bonds MDF, Pine and Ply - Ideal for face/edge joinery - Interior use - Sandable - Heat and water resistant (D3 rating) - Suitable for Rimu and Beech

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 600 gram per square meter of matting. 600 GSM (Grams per square meter) isnot flexible matting and is widely stocked by our distributors. as It doesn't bend around curves and cornersvery well at all but offers ex...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 300 gram per square meter of matting. 300 GSM (Grams per square meter) is our most flexible matting and is widely stocked by our distributors as it will bend around curves and corners the easiest. This mat has a...

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 450 gram per square meter of matting. 450 GSM (Grams per square meter) isstill relatively flexible matting and is widely stocked by our distributors as it will bend around curves and corners but not to the same ...

This is ourEpoxy Mortar product which is typically used as a concrete glue. As with all of our epoxy products it offers enormous strength and it's best holding power is achieved with attaching ceramic products to ceramic productshowever this product is extremely versatile and as with most of our pro...

Material World / Chemistry 2 Experiments, learning and experimenting with polymers, and changing states of matter. Generous materials for 2 experiments for 30 students, or 2 experiments for 60 students working with a buddy. Workbook and teacher materials included. 2 separate experiments designed to ...