technicalracing ♡
×-
$69Sachs Fork Cap Wrench for 48mm and 46mm ForksFork cap tool specific to Sachs forksBuy from Store ⊕ More like this 0 0 -
$49Lock wire / Safety WireHigh quality aircraft grade Stainless Steel Lockwire / Safety Wire used for securing important bolts and nuts into place, such as Sump plugs and oil filters on aircraft or microlight , race cars and race motorbikes.Buy from Store ⊕ More like this 0 0 -
$49.95LOCKWIRE / SAFETY WIRE PLIERSThese 215mm (235mm for reversible type) Lock wire pliers are perfect for any work on Race Motorcycles, Race Cars, Aircraft, and Microlights who all require bolts to be lock wired in place for safety. Made in Taiwan, these are of higher quality than most others on the market (cheaper made Chinese one...Buy from Store ⊕ More like this 0 0 -
$279Motool Slacker V4 Digital Sag Tool (Bluetooth)Measure your sag without needing someone to help you with the new Slacker Digital Sag Scalehttps://vimeo.com/725365400 INTRODUCING THE SLACKER V4The new Slacker V4 Digital Suspension Tuner with Bluetooth® takes suspension tuning to a whole new level. Now you can use your Apple® or Android® device...Buy from Store ⊕ More like this 0 0 -
$59Fork Cap Tool to fit Ohlins- 1/2" / 27 mm hex drive- Four round drive pins- Socket design for OHLINS- Material anodized aluminum alloyFor FKR FGRT,FGR700, 710, 800, 900 & FGK-kit NIX.OHLINS tool: #00797-08.Buy from Store ⊕ More like this 0 0 -
-
$75Fork Oil Height ToolThis is an essential tool for setting the fork oil height or air gap in motorcycle front forksBuy from Store ⊕ More like this 0 0 -
$35clip pick toolThis tool is ideal for removing shock clips, and fork seal clips without damaging the parts around themBuy from Store ⊕ More like this 0 0 -
$34.95Fork Cap Spanner WP 50mm Dual Chamber- AluminiumTo work on the likes of:KTM 250SX 250SX-F 350SX-F 450SX-FBuy from Store ⊕ More like this 0 0 -
$34.99Fork Jam Nut SpannerThese are used to undo the Fork Jam nut on many fork cartridges such as Ohlins, Nitron, YSSBuy from Store ⊕ More like this 0 0 -
$69.95Shaft Holding Tool 10mm, 12mm, 12.5mm, 14mmThese have retaining holes with pins to hold in positionBuy from Store ⊕ More like this 0 0 -
$43.502 in 1 Showa Fork Cap ToolDouble end design allows you to remove the cartridge on Showa SFF forks and twin chamber Showa forks.Tool holds cartridge so it can be removed from the fork cap.This tool will help you to reduce risk of damage during disassemblyBuy from Store ⊕ More like this 0 0 -
$34.9933-36mm Shock Seal Head Setting Tool33-36mm Shock Seal head set toolBuy from Store ⊕ More like this 0 0 -
$49Fork Cap Tool to Fit Ohlins Road and Track Forks/CartridgesThis Fork Cap tool is required to remove the caps of Ohlins Road and Track forks such as Triumph 675RBuy from Store ⊕ More like this 0 0 -
$19.9517mm Fork Bottom Cap ToolThis tool is used for the bottom cap/cartridge cap tool on WP and Sachs Off Road Forks.Buy from Store ⊕ More like this 0 0
×