Digital Signal Wireless Transmitter

With the release of the new Wireless Transmitter and Receiver unit RSE have been able to increase the scope of both monitors and cameras that can be used in a wireless application.

The Wireless Transmitter can connect to any camera system and power up from a 9V to 32V supply. It has an IP69 waterproof rating. It can transmit to either a matching receiver or directly to the RSE 5" and 7" Wireless Monitors. It can be mounted at the rear of a caravan/5 th wheeler or alternatively mounted at the tow bar end to create a stronger signal that is less subject to interference.

Both the transmitter and receiver have pairing buttons to facilitate the pairing operation.

The trigger wire selected determines which camera is on the monitor.

One transmitter required per camera input.

Specifications:

Antenna Impedance: 50ohm
Signal transmission distance: 50m
Video signal format type: CVBS
P/N system resolution: 720x576 (NTSC) /720x480 (PAL)
Video frame: 30fps/25fps
Video output: 1.0vp-p, 75ohm
Video SNR S/N: 50dB
Audio Output: 1.0±0.2Vp-p, 10Kohm
Audio SNR S/N: 58dB
Voltage input: DC 12-24V
Power: 2.4W
Waterproof grade: IP69
Vibration rate: 10G
Operation temperature: -30°c-70°c RH95% Max
Storage temperature: -30°c-70°c RH95% Max